PDA

View Full Version : HOW TO DO YOUR SIGNATURE *Read before asking*

zippydaspinhead
04-16-2005, 07:28 AM
There are a lot of people asking this is I will answer the question before you ask.

Your signature must be on the internet. If it is not you can post it in ImageShack or Photobucket. After making sure your image is on the web copy the URL. Then click on the profile link at the top of the page. After doing so, look for the signature text box, it is bigger than the others. Then put in this. THE URL YOU COPIED

your signature should now show up. HOWEVER there are a few guildlines you must follow (note: these are also listed in the General Forum *thanks Kerry*):

1. Signatures must be under 600 by 150 pixels.

2. You are allowed text in your signature... But keep in mind, If you already have a sig that is 600 x 150 and then you write 5 lines of just writing, It is still to big, 1 or 2 is more appropriate.

3. If you want to stack two pictures, or put them side-by-side, they still must be within the limits. When the two pictures are on top of each other they should not by higher then 150 pixels. If pictures are placed side by side, they should not increase 600 pixels long.

4. If you use a signature that is flash, these rules still apply to you. Make sure your flash is still under 600 by 150.


If your sig breaks these limits, please change it. If a sig is seen breaking these, the mods will will PM you. If you do not change it, you will be warned and it will be deleted.


Thank you and please stay within these guildlines.
Sperry
04-16-2005, 12:42 PM
Heh. Copy and paste work well these days?
noobpwner1
04-16-2005, 01:25 PM
If you already have a sig that is 600 x 150 and then you write 5 lines of just writing, I will say it is too big.
Yeah, really.
Sperry
04-16-2005, 01:32 PM
*cough* hypocrit *cough*
gorgieboy
04-16-2005, 01:37 PM
*cough*hippocrit*cough*
Justin
04-16-2005, 01:55 PM
Yeah, pretty much the whole sock council is in violation... Oh well. What are you going to do.
Sperry
04-16-2005, 01:55 PM
It's spelt hypocrite. N00b.
noobpwner1
04-16-2005, 02:06 PM
Yeah, pretty much the whole sock council is in violation... Oh well. What are you going to do.
I'm not! :)
Sperry
04-16-2005, 02:22 PM
I was, but I fixed my sig. Just had to crop 5 pixels.
zippydaspinhead
04-17-2005, 07:57 AM
yeah yeah yeah, so i didn't revise it as i should have hold on.
Justin
04-17-2005, 11:05 AM
OK, I'm now in compliance.
zippydaspinhead
04-22-2005, 06:15 AM
im working on a sig, but it may take a bit.
Impulse
04-22-2005, 12:53 PM
It's spelt hypocrit. N00b.

It's "hypocrite". Noob(s).
suprem kite
04-27-2005, 04:54 PM
Hey how do you add a link to your sig. and on second thought could someone just give me all the html codes thx.
Impulse
04-27-2005, 05:12 PM
For those out there that want to make a site appear as clickable text...

Use the following code:

Text you want to display on the boards

Example:

xgenstudios (http://www.xgenstudios.com)

In this case, using the "URLHERE" as "http://www.xgenstudios.com" and "Text you want to display on the boards" as "xgenstudios".

Note: To show example, there was a needed space between "url" and the "=" symbol. The actual code holds no such space.


And to suprem kate,

http://www.w3schools.com/html/tryit.asp?filename=tryhtml_imglink (w3schools (http://www.w3schools.com) has many more tutorials on HTML as well. Look there for quick reference on HTML)
_Gravy
04-27-2005, 06:43 PM
Sig limits are for terrorists.
Justin
04-27-2005, 07:13 PM
You don't have to put in the link code anymore. Now it will automatically parse a URL and make it a link. However, if you want the text displayed to be different from the link itself, then use the code.
suprem kite
04-27-2005, 08:19 PM
For those out there that want to make a site appear as clickable text...

Use the following code:

Text you want to display on the boards

Example:

xgenstudios (http://www.xgenstudios.com/)

In this case, using the "URLHERE" as "http://www.xgenstudios.com" and "Text you want to display on the boards" as "xgenstudios".

Note: To show example, there was a needed space between "url" and the "=" symbol. The actual code holds no such space.


And to suprem kate,

http://www.w3schools.com/html/tryit.asp?filename=tryhtml_imglink (w3schools (http://www.w3schools.com/) has many more tutorials on HTML as well. Look there for quick reference on HTML)

Ok a few things to say thx. and you spelled my name wrong it's KITE not Kate but no big deal. And the only reason i asked for the html codes was because alot of sites have different hatml codes but ya thx agian.